Tag Archives: MakerBot
Student Creates LEGObot 3D Printer Made Entirely of LEGOs
LEGObot 3D Printer
Engineering student Matt Kreuger loves LEGOs and 3D printing, so why not combine those passions? Kreuger is the creator of the LEGObot, a 3D printer built almost entirely out of LEGO blocks.
Unlike other desktop 3D printers, the LEGObot is limited to hot glue which makes it more of a novelty than utility, but not bad for a first version!
Kreuger posted his design on Instructables along with this story and video.
Ever since I saw the first makerbot, I have been obsessed with 3D printing, but I am an engineering student so I don’t have an extra $800-$2500, and have been doing my best to create one out of what I have on hand. I tried arduino with easy drivers, and parallel port, but neither one gave results, I always needed a tool or part that I couldn’t get. So I pulled out my old box of legos and started building.
This is a project I have been working on for the past year, it prints in hot glue and made almost completely out of legos. Based roughly on the first version of the makerbot, while it does print, I would call this more of a prototype than a finished project. I am using 4 power supplies (3v extruder, 7.2v for nxt, 12v fan, and 115 for hot glue gun) and having to manually turn the extruder on and off, (although i am working on that one) . Unfortunately, due to my lack of computer programming skills, every move has to be manually programmed from the NXT programming software, I have yet to find a g-code interpreter for the NXT.
Hopefully in the next version I will be able to shorten the height of the platform, reduce wobble, and use g-code files.
but in the mean time, I have included a Lego Digital Designer file with the full printer in it, just about all the technic parts are exactly the same as in my printer, but for the structure I used different parts to speed the digital building process, the structure and dimensions are still the same. under each X and Y axis there are 2 suspended blocks that I placed coins in to balance the weight of the motor on each side, for the extruder motor I used a lens adjustment motor out of an old VHS camera because it was low speed/high torque. In the .ldd file, the green box on the right side of the extruder gears is the case I made for it, it works perfectly.While hot-glue works, its very rubbery and doesn’t have many practical uses, if only one or 2 layers are printed then it will stick to glass to make window stickers, but its not sturdy or rigid, I will be experimenting with printing using wax and heat-melting resins in the future. I am currently limited to what I can make with what I have at hand, some more printed parts could really improve accuracy on this. I initially did not have enough gear racks so I asked someone who had a 3D printer at work if he could help me out, I was able to get around 30 of them printed, and while they work, they do not connect perfectly to the legos, which is what causes most of the wobble in the platform.
IndieGoGo Campaign The Touch-Up Promises to Smooth 3D Printing
Crowdfunding Campaign to End Manual Polishing for 3D Printing
One of the less publicized aspects of 3D printing, specifically FDM, is the tedious work required after you press “print” with your MakerBot, Printrbot, Ultimaker, or any other 3D printer. Every 3D printer has a defined resolution, which is the thickness of each layer. Typical desktop 3D printers have a resolution of around 100 to 200 microns. The result looks like the image below, visible horizontal lines in the finished product.
To smooth out these lines, advanced 3D printing enthusiasts typically use a sanding technique followed by polishing. Remember, with many desktop 3D printers, the material used is ABS plastic. It is soft enough to smooth out, but requires this manual effort.
Introducing The Touch-Up
3D Customization Co. has developed a product that employs a new technique for smoothing and finishing 3D prints without the manual effort. The product is called The Touch-Up, and 3D Customization Co. has launched an IndieGoGo crowdfunding campaign to raise $5,000.
We interviewed CEO Westley Harrell about The Touch-Up.
On 3D Printing: What is The Touch-Up?
Westley Harrell: The Touch-Up is a product used to smooth and polish rough edges due to the 3D Printing process. Achieve amazing results using various print layers. Imagine a finish you can see yourself in! Literally! Stop wasting time hand sanding and hand polishing your 3D printed ABS models. Let The Touch-Up do it for you! This product allows you to get professional looking models faster by letting The Touch-Up smooth your print for you while another model prints. We found that when using MakerBot’s ABS filament, we were able to get faster polishing times with a great overall consistency with each model polished. (Same filament used in our video and pictures)
I used to spend a lot of time finishing my models after they were printed to get a really clean and smooth surface. I tried different techniques from spray enamel to dipping the part in different chemicals. It took months until I figured out the best method for polishing 3D printed ABS models. That was to submerse the ABS model in Acetone vapor. From that came the idea of vapor sanding and The Touch-Up was conceived.
Anyone who uses ABS to 3D Print will find The Touch-Up a great addition to their 3D Printing Arsenal. We made it easy to use and easy to clean so anyone who 3D Prints could use it.
On 3D Printing: Why are you turning to IndieGoGo for funding?
Westley Harrell: We chose IndieGoGo because we wanted to make The Touch-Up available to anyone, anywhere. This campaign also helps provide funding for upgrades and will help us move forward with this product. Also through this 30-day campaign we will be able to identify the need for this product, and determine how much time should be invested in bringing this product forward to consumers in the future. This is just the first project we are bringing to the public. We want to identify which product is in the highest demand.
Origins of Acetone Vapor Bath in the Maker Community
While The Touch-Up is the first commercialized product to use an acetone vapor bath, the origins of this technique look to be from the Maker community. In February 2013, Austin Wilson posted on his blog about a new technique that he and his friend Neil Underwood were developing to polish 3D printed objects using acetone vapor baths.
Neil also posted his results on the RepRap blog. Neil explained his inspiration:
Treating ABS parts with acetone is almost as old as RepRap itself, but usually this has involved either dipping the part into liquid acetone, which causes white streaks in the parts, or brushing the acetone onto the part with a slurry mix, which can work very well but tends to be a messy process.
I have seen several setups out there, one by the Solidoodle Folks that involved a deep fryer, ice, tubing, and a candy thermometer, or completely passive systems that just used unheated acetone like TBuser of Makerbot did.
Unlike the other experiments, Neil and Austin heated the acetone in a closed chamber. The results were impressive.
In March, Wired magazine published a feature about Neil and Austin and their vapor bath technique. With the additional exposure of their approach came a new caveat:
Anyone interested in trying this should take care. Wilson says points out that acetone isn’t especially dangerous, but it has to be handled carefully since the vapor can catch fire if exposed to sparks or flames.
If you like this idea and want to help fund the first commercial product to use acetone vapor baths to polish 3D printed objects, go check out The Touch-Up at IndieGoGo.
Top 3D Printing News Last Week: 3D Printing Conference, Ellen Page, Much More
3D Printing News
A roundup of the top 3D printing news from July 8 to July 14:
Monday, July 8
Tuesday, July 9
- 3D Printed Spider is So Life-Like It’s Scary (Video)
- 3D Printing Startup Mixee Labs Launches Customizable 3D Printed Cufflinks
Wednesday, July 10
- MakerBot and Stratasys Take Center Stage at the Inside 3D Printing Chicago Keynote
- 3D Printing Sparks Innovations in Art – MGX by Materialise at Inside 3D Printing Chicago
- Microsoft Confirms Plans to Take 3D Printing to the Masses at Inside 3D Printing Chicago
- Top Photos from Inside 3D Printing Chicago Conference Day 1
Thursday, July 11
- Canadian Actress Ellen Page Tweets “No F ing way” About 3D Printing – Our Response
- Inside 3D Printing Conference Chicago: Day 1 Top Stories
- 3D Systems CEO Predicts Moore’s Law Will Hit 3D Printing Technology – Inside 3D Printing Chicago
- Simulation-Based Design for 3D Printing: Special Effects and the Store of the Future
- 3D Printed Fashion: From Fantasy Gowns to Accessible Couture – Inside 3D Printing Chicago
Friday, July 12
Saturday, July 13
Poppy Kickstarter Closes in on $150,000 to Turn Your iPhone into a 3D Camera
Poppy Soon to Hit $150,000 Crowdfunding Milestone
A few weeks ago, we covered the Kickstarter campaign launch of Poppy, an innovative device that lets you capture, view and share images in 3D, using only your iPhone.
With an initial target of $40,000 in crowdfunding on Kickstarter, Poppy raced past that goal on day 1 and is now closing in on $150,000 with 11 days left in the campaign.
As is common with Kickstarter campaigns, Poppy has a set of stretch goals that only kick in if the funding campaign outperforms its target. The first stretch goal was $100,000 and the reward was the inclusion of a simple tripod screw mount for every Poppy. It was easily achieved.
The second stretch goal is $150,000, and the reward will be the release of a white Poppy, available to those who pledged $59 or more.
3D Printing Inspiration
We chatted with the Poppy founders about how 3D printing played a role in Poppy’s development. It enabled them to iterate fast and create a working prototoype that they could use in customer development.
Poppy founder Joe Heitzeberg explained, “3D printing helped us make Poppy stylish and easy to use by allowing us to iterate the design and get actual usage feedback from real users before committing to the more costly work of tooling for injection molds.”
As we reported previously, if you pledge $1,200 or more on Kickstarter, you can receive one of the original 3D printed functional prototypes.
Below is a video showing how Poppy works.
eBay Breaks into 3D Printing with iPhone App eBay Exact – Our Review
eBay Exact is an iPhone App for 3D Printed Goods
Leading auction marketplace eBay is the latest major e-commerce company getting into 3D printing, following the recent news by Amazon, Tesco, and others. eBay launched an iPhone app called eBay Exact that lets users customize and order 3D printed goods.
How eBay Exact Works
eBay has partnered with 3D printing companies and designers, including MakerBot, Sculpteo, and Hot Pop Factory, to source 3D printed goods that can be customized and purchased.
Here’s the description from the eBay Exact product page:
Unleash your creativity by customizing select products to create exactly what you want with eBay Exact. Simply select a product, choose a design, and add your own personal flair to create a unique item for yourself or someone special!
With our first foray into 3D printing technology, we have partnered with Sculpteo, MakerBot, and Hot Pop Factory who are leaders in 3D printing technology to hand-select a range of special products including, iPhone cases, figurines, and jewelry.
Take the power of creation into your own hands and download the app now to start customizing right away.
Bring your style to life. Choose from a variety of materials, including plastics, wood and metals. Use the engraving feature to further customize your product.
Be the first to use new technology to create one-of-a-kind iPhone cases, jewelry, and figurines based on self-portraits.
Build your collection. Whether you love jewelry or figurines, eBay Exact allows you to create as many unique products, exactly as you like, based on your personal desires and preferences.
Reviews
There are just a few reviews so far, but some of them are glowing.
“Really cool app that gives affordable access to 3D Printers. I’d love to see more templates to customize and buy. Opening up to user generated content – a deviantart like community for 3D models would really make this a very addictive app!”
“App is beautiful- first company to do something like this, impressive.”
Below is a gallery that shows how you can discover an item, customize it and preview your design before ordering it.
Get the app for iPhone and iPad at iTunes or learn more about eBay Exact at eBay.