NASA and Made in Space Launch 3D Printing Space Experiment

Like this? Share it.TwitterFacebookGoogle+ReddittumblrbufferEmail

NASA Space 3D Printing

3D Printing Coming to an International Space Station Near You

In the world of 3D printing, some of the most amazing and seemingly far-fetched ideas that have been dreamt up relate to how 3D printing could be used in space. We have published stories about research to 3D print a lunar base or repair a spacecraft.

Well, there’s more. NASA has partnered with Made in Space, Inc. to launch a joint initiative for the first 3D microgravity printing experiment to the International Space Station.

“As NASA ventures further into space, whether redirecting an asteroid or sending humans to Mars, we’ll need transformative technology to reduce cargo weight and volume,” NASA Administrator Charles Bolden said during a recent tour of the agency’s Ames Research Center at Moffett Field, Calif. “In the future, perhaps astronauts will be able to print the tools or components they need while in space.”

If successful, the 3D Printing in Zero G Experiment (3D Print) will be the first device to manufacture parts in space. 3D Print will use extrusion additive manufacturing, which builds objects, layer by layer, out of polymers and other materials. The 3D Print hardware is scheduled to be certified and ready for launch to the space station next year.

NASA is a government leader in 3D printing for engineering applications. The technology holds tremendous potential for future space exploration. One day, 3D printing may allow an entire spacecraft to be manufactured in space, eliminating design constraints caused by the challenges and mass constraints of launching from Earth. This same technology may help revolutionize American manufacturing and benefit U.S. industries.

The president’s Advanced Manufacturing Initiative cites additive manufacturing, or ’3D printing,’ as one of the key technologies that will keep U.S. companies competitive and maintain world leadership in our new global technology economy,” said Michael Gazarik, NASA’s associate administrator for space technology in Washington. “We’re taking that technology to new heights, by working with Made in Space to test 3D printing aboard the space station. Taking advantage of our orbiting national laboratory, we’ll be able to test new manufacturing techniques that benefit our astronauts and America’s technology development pipeline.”

In addition to manufacturing spacecraft designs in orbit, 3D printers also could work with robotic systems to create tools and habitats needed for human missions to Mars and other planetary destinations. Housing and laboratories could be fabricated by robots using printed building blocks that take advantage of in-situ resources, such as soil or minerals. Astronauts on long-duration space missions also could print and recycle tools as they are needed, saving mass, volume and resources.

“The 3D Print experiment with NASA is a step towards the future,” said Aaron Kemmer, CEO of Made in Space. “The ability to 3D print parts and tools on demand greatly increases the reliability and safety of space missions while also dropping the cost by orders of magnitude. The first printers will start by building test items, such as computer component boards, and will then build a broad range of parts, such as tools and science equipment.”

Made in Space previously partnered with NASA through the agency’s Flight Opportunities Program to test its prototype 3D Print additive manufacturing equipment on suborbital simulated microgravity flights. NASA’s Flight Opportunities Program offers businesses and researchers the ability to fly new technologies to the edge of space and back for testing before launching them into the harsh space environment.

For this mission, Made in Space was awarded a Phase III small business innovation and research contract from NASA’s Marshall Space Flight Center in Huntsville, Ala. After flight certification, NASA plans to ship 3D Print to the space station aboard an American commercial resupply mission. NASA is working with American industry to develop commercially-provided U.S. spacecraft and launch vehicles for delivery of cargo — and eventually crew — to the International Space Station.

For more information about Made in Space, visit: http://www.madeinspace.us

Like this? Share it.TwitterFacebookGoogle+ReddittumblrbufferEmail

2 Responses to NASA and Made in Space Launch 3D Printing Space Experiment

  1. […] Read: NASA and Made in Space Launch 3D Printing Space Experiment […]

Leave a Reply to How NASA Plans to Use a Zero-Gravity 3D Printer in Space (Video) Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>