NASA Tests 3D Printed Rocket Engine Injector

Like this? Share it.TwitterFacebookGoogle+ReddittumblrbufferEmail

NASA 3D Printed Rocket Engine Injector

NASA calls 3D printing “game changing for new mission opportunities”

NASA and Aerojet Rocketdyne of West Palm Beach, Fla., recently finished testing a 3D printed rocket engine injector.

This space technology demonstration may lead to more efficient manufacturing of rocket engines, saving American companies time and money.

NASA‘s Glenn Research Center in Cleveland conducted the successful tests for Aerojet Rocketdyne through a non-reimbursable Space Act Agreement.

A series of firings of a liquid oxygen and gaseous hydrogen rocket injector assembly demonstrated the ability to design, manufacture and test a highly critical rocket engine component using selective laser melting manufacturing technology. Aerojet Rocketdyne designed and fabricated the injector by a method that employs high-powered laser beams to melt and fuse fine metallic powders into three dimensional structures.

“NASA recognizes that on Earth and potentially in space, additive manufacturing can be game-changing for new mission opportunities, significantly reducing production time and cost by ‘printing’ tools, engine parts or even entire spacecraft,” said Michael Gazarik, NASA’s associate administrator for space technology in Washington. “3D manufacturing offers opportunities to optimize the fit, form and delivery systems of materials that will enable our space missions while directly benefiting American businesses here on Earth.”

This type of injector manufactured with traditional processes would take more than a year to make but with these new processes it can be produced in less than four months, with a 70 percent reduction in cost.

“Rocket engine components are complex machined pieces that require significant labor and time to produce. The injector is one of the most expensive components of an engine,” said Tyler Hickman, who led the testing at Glenn.

Aerojet Rocketdyne’s additive manufacturing program manager, Jeff Haynes, said the injector represents a significant advancement in application of additive manufacturing, most often used to make simple brackets and other less critical hardware. “The injector is the heart of a rocket engine and represents a large portion of the resulting cost of these systems. Today, we have the results of a fully additive manufactured rocket injector with a demonstration in a relevant environment.” he said.

Glenn and Aerojet Rocketdyne partnered on the project with the Air Force Research Laboratory at Edwards Air Force Base, Calif. At the Air Force lab, a unique high-pressure facility provided pre-test data early in the program to give insight into the spray patterns of additively manufactured injector elements.

“Hot fire testing the injector as part of a rocket engine is a significant accomplishment in maturing additive manufacturing for use in rocket engines,” said Carol Tolbert, manager of the Manufacturing Innovation Project at Glenn. “These successful tests let us know that we are ready to move on to demonstrate the feasibility of developing full-size, additively manufactured parts.”

For more information about Aerojet Rocketdyne, visit: http://www.rocket.com

For information about NASA’s Glenn Research Center in Cleveland, visit: http://www.nasa.gov/glenn

For more information about the Air Force Research Laboratory, visit: http://www.afrl.af.mil

The Manufacturing Innovation Project is supported by the Game Changing Technology Program in NASA’s Space Technology Mission Directorate, which is innovating, developing, testing and flying hardware for use in NASA’s future missions. For more information about NASA’s Space Technology Mission Directorate, visit: http://www.nasa.gov/spacetech

Like this? Share it.TwitterFacebookGoogle+ReddittumblrbufferEmail

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>